This rinser kit features the standard Rhino 600mm Spinjet Pitcher Rinser with an additional Blender attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec.
The RHPR600-S-BL features the standard Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The additional large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.
This rinser kit contains:
- 1 x Rhino 600mm Spinjet Rinser (RHPR600-S)
- 1 x Rhino Rinser Blender Attachment (RHBRM)
- Single drain tray
- Rhino Spinjet Valve
- Low profile body
- Large drain outlet
- Large actuator plate
- Easy to clean
- NSF Certified
- Dimensions: 238mm (W) x 600mm (L) 185mm (D) approx. (Height inclusive of RHBRM Riser) (9.38 x 23.6 x 7.23 in)
- Materials: Stainless Steel
- Drain Hose: 25mm/1mm size
The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
Click here to view the Spinjet parts diagram.
Please Note - It is recommended that a Pressure Limiting Valve (PLV) is used when installing on a mains water line.
Click here to view the installation template.
Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces. Rhino Coffee Gear does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.
Click Here for installation instructions
Click Here for cleaning instructions