Please Note: It is recommended that you use a Pressure Limiting Valve (PLV) when connecting to a mains water line.
Rhino Coffee Gear's new pitcher rinser design brings with it a number of features you have been asking for!
Better Drainage - The drain tray has an improved design to ensure there is no static build-up of residue along with a generous drain outlet.
Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment.
Optional Spinjet Spray Mechanism - The new spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.
Install Parts included with each rinser you will find some fittings and hoses to make installation easier ( 3/8 push fit inlet plus elbow option, 1 metre of inlet hose and drain hose with clip).
NSF Certified - All Rhino Coffee Gear Milk Pitcher Rinsers are NSF Certified.
Dimensions (approx): 231mm width x 354mm length (9.09 x 13.94 in)
Drain Hose: 25mm/1mm size
The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
Click Here for installation template
Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into bench top surfaces. We take no take responsibility for installation cut out errors and provides the sizes and dimensions as a layout guide only.
Click Here for installation instructions.
Click here to view the cleaning guide.
How to connect the drain tray and hoses.
How to fix the o-ring to the activation piston.